五月丁香综合啪啪成人小说,国产精品久久久久9999高清,公车上拨开丁字裤进入电影,亚洲一区二区女搞男

特性

*在嚴格的清潔環境中生產，具有生物安全性

*復合設計，用一個小的體積來提供一個很大的有效過濾面積

*可雙向通氣和進行高壓滅菌

應用

*作通氣口和隔離使用，特別是用在生物技術，醫藥，食品和釀酒業

*為生長環境滅菌通氣和排氣

*藥物分析

*食品和酒類分析-包括保存，裝運和配料容器

*為恒溫箱，高壓釜，EtO滅菌器和發酵器作空氣隔離

技術參數-PolyVENT/SteriVENT囊式通氣口濾器

外殼                                                   polypropylene        

過濾介質                                           PTFE（polyetrafluoroethylene）

孔徑                                                   0.2μm

出口                                                   On inlet

支撐物                                               polypropylene  

封口                                                   Heat-fused

壓力                                           29 psi（2bar）-Forward direction

水壓                                                   29 psi（2 bar）/15 seconds

流向                                                  supported bi-directionally.certain applications may require  orientation,i.e.vents.the pressure rating is not the same both directions.reverse flow only for low-pressure applications.

安全性                                              materials pass USP Class VI

滅菌                                                  can be autoclaved at 121℃ for 20 minutues（maximum 132℃）。Multiple autoclave cycles are possible.however,the responsibility for reuse is with the operator,the device should be protected from cross contamination.an integrity test should be performed after autoclaving.compatible with EtO sterilization.

無熱源                                              LAL total,non-reactive

過濾面積                                          36 mm capsule:500cm²

                                                          75mm capsule:1000cm²

                                                         150mm:2000 cm²    

                                                   50mm disc:16cm²

                                                   25mm disc:4cm²

訂貨信息- PolyVENT/SteriVENT囊式通氣口濾器

目錄號                  膜¹      孔徑     外殼          接口*                     數量/包裝

                                  （μm）                  進口        出口

PolyVENT/SteriVENT 36

6713-5036          PTFE       0.2      capsule         SB           SB                    1

2103                   PTFE       0.2      capsule         1/2”SB     1/2”SB              1

PolyVENT/SteriVENT 75 

6713-1075         PTFE        0.2      capsule        1/2”SB     1/2”SB               1

PolyVENT/SteriVENT 150

2107                  PTFE        0.2      capsule        1/2”SB     1/2”SB               1

2108                  PTFE        0.2      capsule        1/2”Sanitary 1/2”Sanitary    1

PolyVENT  discs

6713-0425        PTFE        0.2       25mm disc     SB          SB                    50

6713-1650        PTFE        0.2       50mm disc     SB          SB                    10

6713-1651        PTFE        0.2       50mm disc     SB          SB                    100

¹PTFE-聚四氟乙烯                                      1/2SB-梯形配用10-2mm3/8”-1/2”軟管

*SB-梯形適合6-10mm1/4”-3/8”軟管          FNP-母式螺紋管