Introduction
Vycor® is often used at the end of a reference electrode or a bridge tube to allow electrical,
ionic conductivity between the bulk of the solution and the internal filling solution, while
preventing large scale convective mixing of the solutions. Vycor, or "thirsty glass" is a porous
glass with a fairly low leak rate.
The Vycor frits, however, are not immortal!
To preserve their useful lifetime, they should be kept wet. If they are allowed to dry out,
solid crystals can clog the narrow pores and increase the electrical resistance. In extreme
cases, the Vycor can crack upon drying out.
When not in use, the reference electrode or bridge tube can be stored with the Vycor frit
immersed in distilled water. Diffusion through the Vycor is fairly slow, and the internal filling
solution will not be diluted, even upon a few weeks of storage.
An alternative is to replace the small plastic cap that was in place when the reference
electrode was shipped.
提供商 |
美國Gamry電化學 | 下載次數 |
88次 |
資料大小 |
50.9KB | 資料類型 |
PDF 文件 |
資料圖片 |
-- | 瀏覽次數 |
3056次 |
(空格分隔,最多3個,單個標簽最多10個字符)
會員.png)
9
立即詢價
您提交后，專屬客服將第一時間為您服務