單絲拉力試驗機

產品名稱：單絲拉力試驗機

顯示方式：液晶顯示

產品型號：DLS-300

一、單絲拉力試驗機產品性能特點：

DLS系列單絲拉力試驗機滿足GB1040， GB13022，GB17200，GB16491等要求。該機廣泛應用于塑料，橡膠等原料和制品的生產和科研中，電子拉力試驗機適合化工生產企業，高等院校，科研院所用于材料的力學性能的測定.主要用于塑料薄膜，織物，皮革，單絲，金屬箔帶等材料的測試.該機廣泛應用于金屬、非金屬及各種復合材料的檢驗分析，是科研院校、大專院校、工礦企業、技術監督、商檢仲裁等部門的理想測試設備。

DLS系列單絲拉力試驗機設計融匯、吸收了國外的*試驗設備的控制技術及外形設計，本機外形美觀、操作方便、性能穩定可靠。該機采用全數字調速電機及全數字調速系統作為驅動裝置，經圓弧同步帶及圓弧同步帶輪減速系統減速后帶動精密絲杠副加載.本機無污染、噪音低，效率高，精度高，機械慣性小，調整范圍寬，結構緊湊，使用操作方便，性能穩定等優點

二、單絲拉力試驗機主要技術指標：

01、zui大試驗力：雙柱結構：0-300KN

02、試驗力顯示范圍： 0～300KN

03、試驗力分檔：全程不分檔

04、試驗力測量精度：優于示值的±1%

05、位移分辨率：0.01mm

06、位移測量準確度：優于示值的±1%

07、橫梁移動速度控制范圍：0.05mm/min～300mm/min

08、位移速度控制精度：優于±1%

09、拉伸行程：0～800mm(不含夾具)

10、外形尺寸：850×650×1900（mm）

11、供電電源：220V、50Hz

三、單絲拉力試驗機設備配置：

01、高強度主機一臺（門式結構）

02、高精度光電編碼器一支

03、全數字調速系統和全數字調速電機各一套

04、精密絲杠副一套

05、精密圓弧同步減速系統一套

06、高精度傳感器一支

07、拉伸輔具一套

08、*試驗機控制系統及大液晶顯示器一套

四、單絲拉力試驗機功能介紹：

01、速度瞬間切換：試驗過程中可按預先設定的三個速度瞬間切換，以節約試驗時間

02、自動停機：試樣破壞后，移動橫梁自動停止移動

03、顯示方式：試驗過程動態實時顯示試驗力、位移量、試驗速度、峰值、試驗狀態同時實時在同一液晶屏幕上顯示

04、自動返回：試驗完成后試驗機移動橫梁自動返回到試驗初始位置

05、限位保護：具有程控和機械兩級限位保護功能

06、過載保護：當負荷超過額定值的3～5%時設備自動停止工作

07、自動打?。号渲莆⑿痛蛴C(jī)，可對測試的數據進行打印

親，英文簡介資料如下：

Product Name: monofilament tensile testing machine

Display mode: liquid crystal display

Product type: DLS-300

A, monofilament tensile testing machine product properties:

DLS series single filament tensile test machine to meet the GB1040, GB13022, GB17200, GB16491 etc.. This machine is widely used in plastic, rubber raw materials and products, production and scientific research, electronic tensile testing machine is suitable for chemical production enterprises, universities, research institutes for the determination of the mechanical properties of the material. Mainly used for plastic film, fabric, leather, silk, metal foil belt materials testing. This machine is widely applied to the inspection of metal, nonmetal and various composite material analysis, is the ideal test equipment for scientific research institutions, universities, industrial and mining enterprises, and technical supervision, arbitration and other departments of the.

DLS integrate the design, series of monofilament tensile testing machine absorbed the advanced test equipment and control technology and the appearance of foreign design, the machine has the advantages of beautiful appearance, convenient operation, stable and reliable performance. This machine adopts full digital speed regulating motor and the full digital servo system as the drive equipment, the arc belt and arc synchronous belt wheel deceleration system reducer drives the ball screw loading. This machine has no pollution, low noise, high efficiency, high precision, mechanical inertia small, wide adjustment range, compact structure, convenient operation, the advantages of stable performance etc.

========================================

Two, the main technical indexes of monofilament tensile testing machine:

01, the maximum test force: double column structure: 0-300KN

02, the test force display range: 0 ~ 300KN

03, the test force stepping: full unclassified

04, the test force measurement accuracy: better than showing the value of ± 1%

05, the displacement resolution: 0.01mm

06, the displacement measurement accuracy: better than showing the value of ± 1%

07, beam speed control range: 0.05mm/min ~ 300mm/min

08, the displacement velocity control accuracy is better than ± 1%:

09, the tensile range: 0 ~ 800mm (not including the fixture)

10, size: 850 x 650 x 1900 (mm)

11, power: 220V, 50Hz

=================================

Three, monofilament tensile testing machine equipment configuration:

01, high strength and a host (door structure)

02, a high precision photoelectric encoder

03, the full digital speed control system and the full digital speed regulating motor a

04, a set of precision screw

05, precise arc synchronous reduction system

06, a high precision sensor

07, a set of special tensile.

08, universal testing machine control system and large liquid crystal display a

=====================================================

Four, monofilament tensile test machine function introduction:

01, speed instantly switch: test process according to the preset three speed instantly switch, to save the test time

02, automatic shutdown: sample after failure, automatic stop moving moving beam

03, the display mode: test process dynamic real-time display test force, displacement, test speed, peak, test at the same time in the same LCD screen

04, automatic return: after completion of the test test machine moving beam automatically return to the initial position

05, limit protection: a programmable and machinery two limit protection function

06, overload protection: when the load exceeds the rated value of 3 ~ 5% when the equipment stops working automatically

07, automatic printing: the preparation of micro printer, print the test data